Prefab Metal Aircraft Hanger Buildings For Canada

Olympia Steel Buildings of Canada Supplies Prefab Metal Aircraft Hanger to Ayce-Pro-Corp General Contractors for the Parry Sound Airport in Parry Sound, ON.

Olympia Steel Buildings of Canada has contracted to design, engineer and supply one Olympia Steel Buildings® pre-engineered Aircraft Hanger metal building for the Parry Sound Airport in Parry Sound Ontario. The project consists of a 24m wide x 30m long x 7m high hanger with a 21m wide x 6m high Hydraulic Door and a 6m wide x 30m long office area with Mezzanine. Construction of the facility is scheduled to be completed in spring 2013.

“The people at Olympia Steel Buildings have been a great help.  I was recently at the factory in Pittsburgh, PA and the General Manager (Pat). Head of Design (Ron), Quality Control (Shawn and Bill) all gave me their 24 hour cell phone numbers to use if there were any questions or problems.  Olympia’s warranties and personal attention to details are the best in the business” states Sandy Lenny President of Ayce-Pro-Corp General Contractors in Torrance Ontario.

John Montgomery, National Sales Manager of Olympia Steel Buildings Canada outlined that “this building is an exciting example of the additional feature that can be designed into an Olympia Steel Building”. John points out that this building “features a 4 Ton Crane, Fire Wall separation, Custom colour roof sheeting to meet special Airport requirements, 29 gauge liner panel on interior walls, and a 100 square meter mezzanine floor.”

Olympia Steel Buildings Canada CSA-A660 Quality Certification for Steel Building Systems

The manufacturer of Olympia Steel Buildings ®, Steel Built Corp., has been certified as meeting all requirements of Canada’s CSA-A660 Quality Certification for Steel Building Systems.

 “Steel Built Corp is proud to meet all requirements of Canada’s CSA-A660 Quality Certification for Steel Building Systems,” announced Arnold Davis, President of Universal Steel Buildings Corp, sole supplier of Olympia Steel Buildings®. “Not all pre-engineered metal building companies are able to meet the high standards of quality set by CSA-A660 and the CSSBI. CSA-A660 Certification assures Canadian customers that Olympia Steel Buildings meet or exceed the quality requirements for certification established for pre-engineered metal building systems and are manufactured to adhere to the standards of the CSSBI, the Canadian Sheet Steel Building Institute.“

With CSA-A660 compliance comes the assurance that the manufacturer has been audited for personnel training and adherence to procedures, design and engineering compliance, raw material controls and traceability, and fabrication, warehousing, packaging, shipping compliance to the plant quality program. “ISO Accreditation is not the same as CSA-A660 Certification,” notes Davis. “CSA-A660 certification includes a quality control audit like ISO, but in addition undertakes an engineering design and personnel audit.”

“It is mandatory that U.S. manufacturers selling steel buildings into Canada have this certification,” says Davis. “Our factory, Steel Built Corp, has invested time and money to ensure that our pre-engineered metal building systems meet Canadian standards. All pre-engineered steel buildings and metal building systems bought out of the U.S. should have “factory of origin” documentation written on purchase contracts along with a copy of the CSA-A660 certificate from that factory. Otherwise,” warns Davis, “the buyer may experience problems getting permits for buildings from factories that are not CSA-A660 certified for Canada. Be sure to ask for proof of CSA-A660 certification before you buy.

About CSA-A660 Certification

The CSA-A660 Standard was developed to assist code enforcement officials in reviewing building permit submissions incorporating steel buildings and metal building systems and to help purchasers receive a quality certified building. As part of the CSA-A660 compliance, the manufacturer provides a "Certificate of Design and Manufacturing Conformance" signed and sealed by a licensed Professional Engineer for each building project.

 

 

20 x 20 Metal Building Clearance

Olympia has cancelled metal buildings in stock right now. Cancelled metal buildings are already made, in the yard and ready for delivery. If you are interested Call Now 888-449-7756 Ask for Arnold Davis. If you’re not sure whether these cancelled metal buildings will meet your local codes, Olympia customer Service will be happy to discuss with you whether any of these buildings will meet your local code requirements. Please call 1-88-449-7756 for information.

20' x 20' x 12' - Cancelled Building - Call Now! Steel Building Specifications: Price FOB Plant • Price Too Low to List Call for Price - 1-888-449-7756 - Ask for Arnold Davis

Metal Building Aircraft Hanger Project in Edmonton Alberta

 

Olympia Steel Buildings of Canada has contracted to design, engineer and supply one Olympia Steel Buildings® pre-engineered Aircraft Hanger metal building for a new de-icing facility at Edmonton Alberta International Airport. The project consists of one 1,480 square meter Hanger facility. Construction of the facility is scheduled to be completed in fall 2012.

Aero Mag 2000 is an incorporated company specialized in:

• Aircraft de-icing/anti-icing activities.
• Planning, design, construction, management & operation of centralized de-icing facilities at various international airports in North America.
• Offering consulting services to fleet owners, commercial airlines and airport authorities on aircraft de-icing/anti-icing and centralized de-icing facilities.

Project Manager Etienne Limonges of Aero Mag is confident that Olympia Steel Buildings and John Montgomery will deliver a high quality product because this is the second hanger project Olympia Steel Buildings has provided.

“After the successful install at Vancouver Airport we wanted a repeat performance in Edmopnton Alberta,” says Project Manager, Etienne Limoges. “I am comfortable knowing every detail would be managed by National Sales Manager John Montgomery.”

Pre engineered steel buildings designed for aircraft hangar use by Olympia Steel Buildings are perfect for all your aviation storage needs. Our airplane hangar metal buildings are pre-engineered with a clear-span steel building design that can be up to 300-feet wide – plenty wide enough to accommodate FBO's, private planes and even commercial aircraft. Olympia airplane hanger metal buildings, storage aircraft hangars and military hangar operations steel buildings keep aircraft sheltered from the elements while providing ample space for equipment storage, plane maintenance and repair. You save money with Olympia Steel Buildings pre engineered aircraft hangars because we ship all buildings direct from the steel building factory. Aircraft hangars from Olympia Steel Buildings are pre-engineered at the steel building factory and delivered to the jobsite as a ready-to-assembly metal building package. They go up in less time than conventional airplane hangar construction and save you up to 50% in both time and materials off the cost of conventional construction while at the same time being Eco-friendly to the environment.  

 

 

Prefab Mini-Storage Metal Building Project in Edson Alberta

Olympia Steel Buildings of Canada has contracted to design, engineer and supply one Olympia Steel Buildings® pre-engineered mini-storage warehouse metal buildings for a new mini-storage business in Edson, Alberta. The project consists of one 300 square meter storage facility. Construction of the facility is scheduled to be completed in summer 2012.
As the self storage building business has grown into a multi-billion dollar industry with current businesses expanding and new companies starting up every day,  Olympia Steel Buildings is reaching out to businesses to become their self storage building partner, working to provide secure and cost-effective self storage warehouses and mini-storage facilities that best suit their requirements. Olympia Steel Buildings offers rental unit sizes in any combination to optimize your consumer market demands.
“I used you (Annabelle Miranda) because you guys say what you mean and stand behind your product.,” affirms mini-storage business owner, Chris Biernacki. “Every time I called I always had a reply back from Olympia.”
Olympia Steel Buildings strives to provide a variety of sought after features and benefits to self-storage building customers, including twelve panel and trim colors and virtually maintenance free durable materials.
 “I am confident that our mini-storage steel buildings meet and exceed industry standards,” states Annabelle Miranda, Olympia sales consultant. “That is the reason our customers choose Olympia Steel Buildings for their self storage building needs. Our self storage buildings are the best that money can buy.”
Olympia Steel Buildings continues to strive to provide quality, selection and great customer service on pre-engineered self-storage metal buildings, proving that Olympia Steel Buildings pre-engineered self-storage and mini-warehouse metal buildings are an economical solution to any self-storage business needs.

 

 

Steel Buildings Project For Texas Oil Field Facility

Olympia Steel Buildings® supplies pre-engineered storage metal buildings for Ark-La-Tex Services, an oil field services company out of Carthage, Texas.

Ark-La-Tex Services has provided oil field services to the oil industry in the quad-state area since 1997, providing septic systems, water tanks, dumpsters, trash trailers, portable toilets, holding tanks and potable water. After fourteen years in the business, owner, Rodney Wooten and his wife Margaret decided it was time for the company to grow.  They had ambitious plans for positioning the company as a leading player in the region.  Integral to their plans was the construction of modern new facilities that would not only be a perfect fit for the current company size, and construction that could easily expand to accommodate the projected future growth and recognized that pre-engineered steel buildings could provide the flexibility their plans demanded.  After researching other metal buildings companies, including those local to their area, Ark-La-Tex Services contracted with Olympia Steel Buildings for supply and construction of new facilities.
The new construction consists of two metal buildings, one 32,000 sf pre-engineered steel building to be used as a warehouse, and the other a 9,000 sf pre-engineered steel building to house office facilities for Ark-La-Tex Services.  Olympia Steel Buildings  supplied and erected the pre-engineered steel buildings, installed the windows, doors and insulation.

“I’m really glad that Rodney [Mr. Wooten] chose us over a local Texas company,” stated Erika Stanford, the Olympia Steel Buildings building estimator who worked with the Wooten’s every step of the way to get them the facilities they needed. “I know that once he gets these buildings, he will really love the quality. I know that anyone who sees the buildings is going to want an Olympia Steel Buildings pre-engineered metal building. I know that. Rodney and his wife Margaret are really good people and it was very enjoyable working with them. I am happy that they went with Olympia.”

Olympia Steel Buildings Corp. is actively reaching out to other oil services companies servicing Marcellus Shale gas exploration and extraction in West Virginia, Ohio, Pennsylvania and New York State, with their Olympia Steel Buildings pre-engineered metal buildings construction as a cost-effective building solution for companies needing to build new facilities quickly to meet rapid industry growth.

 

 

Cancelled Steel Buildings - In the Yard - Ready To Deliver!

Olympia Steel Buildings has two cancelled steel buildings in stock right now.  These all steel metal buildings are already made, in the yard and ready for delivery. If you are interested Call Now 888-449-7756 Ask for Arnold Davis. Customer Service will be happy to discuss with you whether these steel buildings will meet your local code requirements. Please call 1-88-449-7756 for information.

20' x 20' x 9' - Cancelled Building - Must be SOLD Steel Building Specifications: (1) 8 x 7 Framed Opening 2:12 Galvalume Roof Building Color: Light Stone Sides with Burnished Slate Trim 90 Wind • 20 Roof Snow Price FOB Plant • Price Too Low to List Call for Price - 1-888-449-7756 - Ask for Arnold Davis

20' x 30' x 9' - Cancelled Building - Must be SOLD Steel Building Specifications: (1) 16 x 7 Framed Opening 2:12 Galvalume Roof Building Color: Light Stone Sides with Fern Green Trim 100 Wind • 20 Roof Snow Price FOB Plant • Price Too Low to List Call for Price - 1-888-449-7756 - Ask for Arnold Davis

Olympia Steel Buildings of Canada to Supply Mini-Storage Building Project

Olympia Steel Buildings of Canada has contracted to design, engineer and supply one Olympia Steel Buildings® pre-engineered mini-storage warehouse metal buildings for a new mini-storage business in Carbonear, Newfoundland. The project consists of one 335 square meter storage facility. Construction of the facility is scheduled to be completed in summer 2012.

As the self storage building business has grown into a multi-billion dollar industry with current businesses expanding and new companies starting up every day, Olympia Steel Buildings is reaching out to businesses to become their self storage building partner, working to provide secure and cost-effective self storage warehouses and mini-storage facilities that best suit their requirements. Olympia Steel Buildings offers rental unit sizes in any combination to optimize your consumer market demands.

“I have a high level of confidence and trust in our Mini-Storage specialist, Annabelle Miranda,” affirms mini-storage business owner, Brian O’Grady. “I appreciated her consistent and professional follow-up throughout the entire project from start to finish.”

Olympia Steel Buildings strives to provide a variety of sought after features and benefits to self-storage building customers, including twelve panel and trim colors and virtually maintenance free durable materials.
 “I am confident that our mini-storage steel buildings meet and exceed industry standards,” states Annabelle Miranda, Olympia sales consultant. “That is the reason our customers choose Olympia Steel Buildings for their self storage building needs. Our self storage buildings are the best that money can buy.”

 Olympia Steel Buildings Canada continues to strive to provide quality, selection and great customer service on pre-engineered self-storage metal buildings, proving that Olympia Steel Buildings pre-engineered self-storage and mini-warehouse metal buildings are an economical solution to any self-storage business needs.

Universal Steel Buildings Pays It Forward To Honor Company Founder's Birthday

This year, friends and employees, sales representatives and office personnel of Arnold Davis, Founder and President of Universal Steel Buildings Corp. celebrated his birthday by giving him the gift that he requested – the gift of a charitable donation made to the Fistula Foundation. Moved by the success story of Mahabouba Mohammed, an Ethiopian woman who, by determination and hard work overcame this terrible condition to become part of the nursing staff, helping others as she herself had been helped, Mr. Davis generously matched his birthday contributions in kind, as his way to pay it forward to those in need that they might make for themselves a better life as Mrs. Mohammed had done.

The New York Times article, “Saving the Lives of Moms,” in the May 13 Mother’s Day edition prompted his request. The article spoke of the ostracism, suffering and often death of women who, recently having given birth had fallen to this terrible, but curable condition. The article stated, “More than two million women and girls have fistulas worldwide. They are the lepers of the 21st century, among the most voiceless and shunned people on earth. Fistulas were once also common in America, but today they normally afflict only people in poor countries of Africa and Asia.”

The story of the work of the Fistula Foundation and the dedication of Dr. Steven Arrowsmith touched Mr. Davis and it was his desire to share the opportunity to learn about and promote their work by encouraging company associates to “pay  forward” the many opportunities one has that are often take for granted. The article circulated to a generous response.

The work of Dr. Arrowsmith and Dr. Lewis Wall in the new Addis Abba Fistula Hospital in Danja, Niger, Africa has enabled them to raise $500,000 annually for the operating costs of the hospital and to perform one thousand fistula repairs a year. 

“It has been a rewarding experience for me and the company to contribute to this worthy cause in honor of my birthday,” stated Davis. “I believe that everyone deserves to have a chance to make a better life for themselves and their families. The Fistula Foundation gives women and girls the opportunity to do that – an opportunity they never in the world believed that they might someday have.”

Rutherford Construction Wins GSA Certification

A and S Steel Buildings Wins GSA Certification For Supply And Construction of Pre-engineered Metal Buildings

Rutherford Construction Corp has been awarded a General Services Administration (GSA) Federal Supply Schedule Contract to supply and construct Olympia Steel Buildings® pre-engineered steel buildings to federal, state and local governments with eligibility to use GSA Schedules for select purchases, saving taxpayers money.

 With their extensive knowledge and experience in all aspects of steel building design, engineering and construction, Rutherford Construction Corp offers complete turnkey solutions. Described as “your one stop shop for pre-engineered steel building construction,” Ruthreford supplies pre-engineered steel buildings and metal building systems, manages building erection and provides comprehensive construction services, including: complete steel building design and construction; pre-engineered steel building sales; management of site preparation; pre-engineered metal building installation and erection, as well as complete turn-Key solutions.

 “Rutherford's experienced contractors get the job done on time and in budget with services that include foundation or slab preparation, steel building erection and installation of windows, doors, gutters and downspouts.”

“Our customers always come first. We take pride in our personalized and professional customer service from our first meeting with the customer to discuss their needs through project completion. We take time to build confidence that the customer’s building project with be completed to their specifications while receiving outstanding customer service.”

As a GSA contract holder, Rutherford is certified to supply and erect prefabricated buildings, including Olympia pre-engineered steel buildings and metal building systems to Federal, State and Local Governments and agencies authorized to purchase under GSA Schedule 56, Contract Number GS-07F-0394X, SIN 361-10A Pre-engineered and Prefabricated Buildings and Structures for Storage Solutions and SIN 361-32 Ancillary Services (Installation & Erection). Programs that allow state and local government to use GSA Schedules for select purchases include disaster recovery purchasing for supplies and services purchased directly from Schedule contractors to aid in recovery from Presidentially-declared major disasters or acts of terrorism. On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through the GSA Advantage! Website, a menu-driven database system.

 Recent Rutherford Construction projects include supply and construction of two pre-engineered metal buildings to DDM Properties for Jo's Globe Distributing CO, a retail beer distributorship in Morgantown, West Virginia. Another recent A and S project was supply and construction of a one-hundred thirty-two-unit mini-storage rental facility in Hagerstown, MD, comprised of three 3,000 square foot steel buildings and one 3,600 square foot prefab mini-storage steel building totaling out to one-hundred thirty-two storage rental compartments. Rutherford Construction supplied and installed an Olympia Steel Buildings pre-engineered metal building to Fortune Plastic & Metal, a recycling company based in Dallas, Texas as part of a turnkey construction package. Rutherford has also recently engaged to supply and construct a new Olympia Steel Buildings pre-engineered steel building for Winchester Virginia Church of God. The multi-use building will serve as a church sanctuary and worship space, meeting hall and recreation center complete with a full-size basketball court.

 About Rutherford Construction Corp

 Rutherford Construction supplies and erects Olympia Steel Buildings® to commercial, industrial, agricultural, residential, government, military and civilian agencies. GSA approved Olympia Steel Buildings set themselves apart by using better materials, better quality control, exceptional customer service and industry-leading warranties, including a 25-year rust through perforation warranty.

 

 

Olympia Metal Buildings For Rock & Brews

“Rock & Roll, Cold Beer, Great Food… it doesn't get any better! Keep on Rockin!” Says Rock & Brews about their new restaurant and beer garden, housed in a brand new twenty-seven hundred square foot Olympia Steel Buildings pre-engineered metal building designed for El Segundo, California’s Rock & Brews and supplied by Universal Steel Buildings Corp. The color of the eye-catching new building is “brite red”, while partial walls allow for an outdoor patio and “beer garden” feel with the building decked out like the backstage of a big rock tour, with a “wow” factor unlike any prefab metal buildings seen before now.

Rock & Brews Beer Garden is an outdoor patio and beer garden decked out like the backstage of a big rock tour surrounded with Rock & Rolls’ favorite and rare concert posters and photos. Top menu items are riffs on many iconic Rock bands' favorite foods making Rock & Brews, El Segundo’s hottest new restaurant.

“MEET GENE, BE ON TV, GET FREE FOOD?!” promised Rock & Brews in a recent online invitation to “mingle with Gene Simmons and get the chance to be on ‘Good Day LA’.” Veteran Rock promoter, Dave Furano, one of the owners of El Segundo’s Rock & Brews was tour manager for many great Rock tours, including the Rolling Stones, Bob Dylan, the Grateful Dead, The Doors, and many more. At every concert, he strove to create the ultimate backstage experience for the band’s friends and family including their favorite food, beer and memorabilia. “The concept behind Rock & Brews was to create this same kind of experience, and the Olympia Steel Building we designed and supplied was able to help re-create that sense of fun and excitement the owners were looking for,” stated Lucas Hocker, Vice President of Universal Steel Buildings Corp.

“Rock & Brews is planning to expand to Maui, Hawaii,” states Hocker, “and Olympia Steel Buildings will be there to help assure their continued success with a pre-engineered steel building customized and designed to reflect laid-back Hawaii and the fun-concept of a “back-stage beer garden” that has been so successful for them. “All in all this was a fun project for us, and we got a kick out of the fact that Gene Simmons was there to promote the grand opening.”

 

 

Steel Buildings Rock & Brews

Universal Steel Buildings Corp. designed, engineered and supplied a new twenty-seven hundred square foot Olympia Steel Buildings pre-engineered metal building designed for El Segundo, California’s Rock & Brews. The eye-catching metal building housing the new restaurant and beer garden is “brite red”, while partial walls allow for an outdoor patio and “beer garden” feel with the building decked out like the backstage of a big rock tour.

“Rock & Roll, Cold Beer, Great Food… it doesn't get any better! Keep on Rockin!” Says Rock & Brews about their new restaurant and beer garden, housed in a brand new twenty-seven hundred square foot Olympia Steel Buildings pre-engineered metal building designed for El Segundo, California’s Rock & Brews and supplied by Universal Steel Buildings Corp. The color of the eye-catching new building is “brite red”, while partial walls allow for an outdoor patio and “beer garden” feel with the building decked out like the backstage of a big rock tour, with a “wow” factor unlike any prefabricatedmetal buildings seen before now.

             

Rock & Brews Beer Garden is an outdoor patio and beer garden decked out like the backstage of a big rock tour surrounded with Rock & Rolls’ favorite and rare concert posters and photos. Top menu items are riffs on many iconic Rock bands' favorite foods making Rock & Brews, El Segundo’s hottest new restaurant.

“MEET GENE, BE ON TV, GET FREE FOOD?!” promised Rock & Brews in a recent online invitation to “mingle with Gene Simmons and get the chance to be on ‘Good Day LA’.” Veteran Rock promoter, Dave Furano, one of the owners of El Segundo’s Rock & Brews was tour manager for many great Rock tours, including the Rolling Stones, Bob Dylan, the Grateful Dead, The Doors, and many more. At every concert, he strove to create the ultimate backstage experience for the band’s friends and family including their favorite food, beer and memorabilia.

“The concept behind Rock & Brews was to create this same kind of experience, and the Olympia Steel Building we designed and supplied was able to help re-create that sense of fun and excitement the owners were looking for,” stated Lucas Hocker, Vice President of Universal Steel Buildings Corp.

“Rock & Brews is planning to expand to Maui, Hawaii,” states Hocker, “and Olympia Steel Buildings will be there to help assure their continued success with a pre-engineered steel building customized and designed to reflect laid-back Hawaii and the fun-concept of a “back-stage beer garden” that has been so successful for them. “All in all this was a fun project for us, and we got a kick out of the fact that Gene Simmons was there to promote the grand opening.”

Zoning Considerations Before Building Steel Buildings

When thinking about building, whether steel buildings or conventional construction, it is important to check the zoning requirements of the property where the building is to go up.  The most common zoning approach, Euclidean zoning, named after the town of Euclid, Ohio, where it was first implemented, regulates development through land use classifications.  Common land use classifications are single-family residential, multi-family residential, commercial, institutional, industrial and recreational. The planning goals of Euclidian zoning are to provide for orderly growth, to prevent overcrowding, to alleviate congestion, and to separate incompatible uses, such as making sure that a noisy factory cannot be built near a residential neighborhood. Euclidian Zoning also regulates the height, bulk and area of structures, which you may find in the form of setbacks, side yards, height limits, minimum lot sizes, and lot coverage limits. All of these zoning requirements may affect the success of your metal building construction project. Therefore, it is important to check with your local planning department to find out what local zoning codes apply before you build.

Generally, agricultural use buildings are exempt from requiring a permit if they are beyond the city limits on farms and ranches. However, agricultural buildings still must comply with building codes for that area. If the local zoning ordinances don’t allow for the particular steel building you want to put up, you can try to modify the proposed building to fit the current zoning regulations; or you can look for land not subject to the zoning requirements. Often you can find a suitable property not far from where you originally intended to build, such just beyond the city limits, where zoning laws are typically not as stringent or complex. If all else fails and zoning laws do not permit you to put up your steel building in the location you desire, depending on your locality, you can apply for a variance, a conditional use or non-conforming use permit for your planned steel building.

 

 

Mini Storage Steel Building Construction Notes

 

Universal Steel Buildings construction division recently completed construction of a one-hundred thirty-two-unit mini-storage rental facility in Hagerstown, MD. The storage rental facility is comprised of three 3,000 square foot steel buildings and one 3,600 square foot prefab steel building totaling out to one-hundred thirty-two rental compartments. Universal Steel Buildings construction division supplied and put up the four Olympia Steel Buildings mini-storage buildings for the large self-storage rental facility project. Sixty-six storage units are provided with three-by-seven foot roll-up doors and the additional sixty-six storage units are provided with eight-by-seven foot roll-up doors to accommodate varying customer needs. All four metal buildings are insulated with 2” roof insulation.

 “The mini-storage facility owner, Jeff Smith, was great to work with,” stated Jonathan Mass, Construction Division Design Estimator. “He knew exactly what he wanted to expand his current warehouse business into the growing self-storage rental sector.”

The self-storage rental facility business has grown into a multi-billion dollar industry over the past number of years as folks find the need to downsize but do not want to discard items they may value. Current businesses are expanding and new companies are starting up every day to meet the growing demand. The housing market crisis has added to the demand for self-storage rental units as homeowners find they are unable to maintain their current homes, yet do not want to part with precious possessions. The self-storage industry, once found mainly in high-density apartment rental urban areas, can now be found in all areas, from residential suburbs to industrial parks, both urban and rural areas.

“Owners and facility managers require that their self-storage facilities meet and exceed industry standards for quality, reliability and accessibility – that’s why they choose Olympia Steel Buildings mini-storage rental unit buildings when they decide to go into the business,” explains Mass. “We have twelve panel and trim colors, and our precision fabrication allows the buildings to be erected quickly, minimizing labor costs. All our structural framing is hot-dip galvanized for maintenance-free operation and the buildings can be expanded as the business grows. An added bonus is that steel panels and steel framing provide excellent fire resistance – something that is very important to the customer, to have the peace of mind in knowing their possessions are kept safe.”

 

 

Steel Building Supplied For West Virginia Warehouse

Rutherford Construction supplied United Disposal Services of Mineral County Industrial Park, Keyser, WV, a company specializing in rubbish removal, garbage trash removal, waste hauling, residential garbage service and junk removal services, a prefab Olympia Steel Building for a truck storage facility to house their growing fleet of trucks. United Disposal’s services also include solid waste disposal, residential and industrial waste removal, containerized waste and rubbish removal, compaction units and commercial services.

The five-thousand square foot pre-engineered metal building has three fourteen-by-fourteen sectional overhead doors to allow for easy movement of trucks into and out of the building. In addition, there are two three-by-seven walk doors. The building also has three inches of insulation on the roof and walls that will keep the temperature in the building both cool in summer and warm in winter, saving the company on energy bills as well. The prefab steel building was completed with gutters and downspouts installed with the building.

“The guys at Olympia were great to work with,” stated Bill Hood, of United Disposal Services. “They worked with us every step of the way to get us the building we needed. Everything went smooth as could be and the building is perfect for what we need it for – we’re very pleased with our Olympia Steel Building and are happy with the fact that it will allow our business to grow.”

“Rutherford construction service not only supplied and installed the building, but we supplied and installed the concrete foundation with a six inch slab,” stated Jonathan Mass, Construction Department Design Estimator. “The best thing about it is that as the company grows, their building can be expanded to meet any future need.”

 

 

Turnkey Metal Building Supplied to West Virginia's DDM Properties

Universal Steel Buildingsrecently announced the supply and construction of two pre-engineered metal buildings to DDM Properties for Jo's Globe Distributing CO, a retail beer distributorship in Morgantown, West Virginia. The project includes the supply and construction of a fifteen hundred square foot building attached to a new five-thousand six-hundred twenty-five square foot building also supplied and constructed by Universal Steel Buildings Construction Division.

  The attractive new building has “lightstone” exterior wall sheeting with “fern green” trim, gutters and downspouts. The innovative paint used by Universal Steel Buildings on their Olympia steel buildings comes with a forty-year warranty, making for a maintenance-free exterior that never needs painting. This high-technology paint coating is a “cool coating” designed to act as a thermal barrier to reflect the sun’s rays, keeping the insides of metal buildings up to twenty percent cooler and reducing HVAC costs year-round.

 “The building is great,” stated Mike Marrara of DDM Properties. “The building has everything we need – office space, cool warehousing for the beer we distribute, easy-access truck bays for loading and unloading the product and a showroom where customers can choose from the many different types of beer and wine that we have on display.” Jo’s Globe Distributing Company is committed to providing outstanding customer service, selection and value. They pride themselves on being a company where customer service means fast, quality service and a friendly attitude. The retail beer distributor’s products include wheat beer, non-alcoholic beer, American and imported beers, wine and other quality products.

 “Olympia Steel Buildings can be used for just about anything you need,” explained Jonathan Mass, company Design Estimator. “The quality of the buildings is unbeatable and we’re proud to be supplying them and putting them up. It gives a great sense of satisfaction when you can look at a great looking building and say, we did this, we supplied and put this building up.”

 

 

Olympia Steel Buildings Completes New PA Fastenal Store

Olympia Steel Buildings recently supplied a five-thousand square foot pre-engineered steel building to Fastenal for a new store located in Lower Burrell, near Greensburg, PA. The building is designed with a standing seam metal roof in Galvalume® steel and uses heavy-duty 24 gauge steel on all panels, including sidewalls. The metal buildings exterior uses a “cool” paint coating in light stone and the trim is polar white. All interior beams are painted white, and when completed the building will be insulated with the “simple saver” insulation system. Construction is slated for completion at the end of March 2012.

 “The customer was great to work with,” asserted Victor Gutierrez III, Universal Steel Buildings sales manager. They had done lots of shopping around and even visited the factory in Ambridge before they decided on going with Olympia Steel Buildings.”

Fastenal is a supplier of a myriad of essential items, from fasteners, to cutting tools and plumbing, HVAC and automotive. The company has its own national distribution network to provide needed supplies for the local communities they serve. Each of their 2,500+ local stores is also a one-stop source for the supplies needed to prepare for and deal with natural disasters, from bottled water and first aid supplies to safety gear, flashlights and power tools. As part of the company’s “Green Corporate Responsibility” initiative, they are ensuring that any new building or refurbishment plans adhere to current environmental standards and energy conservation requirements. Where possible, they source materials from suppliers who operate in an environmentally friendly manner and who, to reduce delivery miles, are geographically local. A lot has changed within the company in their more than 40 years of operation. The original single store with the wooden door for a front desk has been replaced by more than 2,500 stores with locally tailored inventories and modern merchandising, including the new 5,000 s.f. pre-engineered steel building supplied and constructed by Universal Steel Buildings to serve the local community near Greensburg, Pennsylvania.

“They were impressed with the quality control they saw when they visited the metal building manufacturing plant and the fact that Olympia Steel Buildings is a member of LEED and committed to Green building principles. Because our steel buildings are Green and environmentally friendly and steel can be recycled, the fact that we use “cool” paints that reduce energy usage and the company’s carbon footprint, and that we are geographically local, all sealed the deal for them.”

 

 

Steel Building Supplied To Pennsylvania's Metalico

Universal Steel Buildings Corp. recently announced supply and construction of a twelve-thousand three-hundred square foot metal warehouse building for Pennsylvania company, Metalico, Inc. Universal Steel Buildings construction division was selected to supply the Olympia Steel Buildings pre-engineered metal building, provide all concrete work and construct the building. The eighty-two by one hundred fifty foot pre-engineered steel building with a twenty-foot eave height will be used for a warehouse for non-ferrous scrap metal sales. The order was placed on December 12, 2011 and the building was delivered on January 7 2012. The new building, an attractive pearl gray with rustic red trim and 1:12 pitch screw-down Galvalume roof will be attached to an existing building at the company’s Neville Island site. Construction is slated for completion by April 1, 2012

 “They were very easy customers to work with,” stated Victor Gutierrez III, Universal Steel Buildings sales manager, speaking about Metalico, Inc. “Once they met with us, toured the metal building factory and saw the quality and precision engineering, they were sold on Olympia Steel Buildings.”

Metalico operates both ferrous and non-ferrous scrap metal recycling facilities in New York, Pennsylvania and Ohio, serving U.S. and Canadian markets.  All forms of metal scrap are purchased from manufacturers, small scrap dealers, demolition contractors and peddlers. Metalico Pittsburgh is a full-service metals recycling company that plays a leading role in scrap metals recovery both in the U.S. and abroad. They emphasize that recycling of metals saves natural resources, energy, and consumption of scarce landfill space.  Metalico scrap locations are positioned to offer easy access to peddlers and local residents, and encourage recycling of metal scrap, such as siding, window frames and doors, which typically end up in landfills.  They are one of a handful of companies in the U.S. that own and operate the state-of-the-art Texas Shredder model 80/104 for the shredding of scrap metal. Easy access to the facility by barge from the Allegheny, Monongahela and Ohio Rivers allows Metalico to handle the largest demolition and recycling jobs. The POHC Railroad also services their Neville Island facilities.

The U.S. Environmental Protection Agency (EPA) has recognized the company's use of renewable wind energy and named Metalico as a Green Power Partner. Metalico continues to contribute to efforts to use renewable energy, reduce pollution and encourage recycling. 

“Because Metalico prides itself on being a Green company, the decision to go with Olympia was easy,” Gutierrez observes. “Pre-engineered steel buildings are inherently Green, and since the steel building factory itself is located just a few miles away from the construction site, it meets Green building requirements of sourcing materials locally as well.”

 

 

Olympia Steel Buildings Announces New Office In Canada

Olympia Steel Buildings Serving Canada has announced that they are expanding their offices and have moved to Historic Main Street Unionville into the restored Queens Hotel at a 178 Main Street, Unionville, Ontario, Canada.

“Our low overall cost business model combined with the strength of the Canadian dollar is the reason that Olympia Building Systems has expanded throughout all of Canada, requiring opening of our new offices at the Queen’s Hotel,” explains company Vice President, Steve Wetmore.  “Olympia Steel Buildings’ team of professionals using our low overall cost business model ensure that our customers are provided with the very best products and services at the lowest possible price available in the market today.”

The new Queen's Hotel location of offices for Olympia Steel Buildings Canada, originally built during the 1860’s and recently restored, is the landmark of Unionville's Main Street. Unionville is a suburban village in Markham, Ontario, located only 33 km northeast of downtown Toronto. This convenient location makes the new offices easily accessible to customers wishing to personally visit Olympia representatives to discuss their building projects. The population of Unionville is only about 50,000, but with a number of “century homes” dating back to the 19^th century, the historic village of Unionville attracts thousands of visitors each year during the Unionville Festival. The quaint main street of the historic town with structures virtually unchanged since its founding in 1794 is renowned for its art galleries, restaurants, shops and unique European views and has been cast as the fictional Connecticut town of “Stars Hollow” during the first season of Gilmore Girls television show, and has appeared as many other television and movie backdrops as well.

“Our professionally trained service specialists provide consistently efficient support on any Canadian project and Canadians respond by buying our buildings,” emphasised Wetmore. “That we control all stages of the quoting, design and manufacturing process including Canadian engineering ensures that our buildings will meet and exceed all local building codes and quality assurance standards and are built to last a lifetime. Canadian engineered stamped drawings are provided as a part of each building package.”

“I would like to encourage our Canadian customers to seize the opportunity of the Canadian dollar and call today,” concludes Wetmore. “We look forward to working with our Canadian customers. Our Olympia Steel Buildings team is dedicated to customer service and making each building project the satisfying experience it should be.”

 

 

Olympia Steel Buildings Completes Twelve-Thousand Square Foot Metal Building For Local Pittsburgh Company

Universal Steel Buildings Corp. recently announced supply and construction of a twelve-thousand three-hundred square foot warehouse metal building for Pennsylvania company, Metalico, Inc. The eighty-two by one hundred fifty foot pre-engineered steel building with a twenty-foot eave height will be used for a warehouse for non-ferrous scrap metal sales. The order was placed on December 12, 2011 and the building was delivered on January 7 2012. The new building, an attractive pearl gray with rustic red trim and 1:12 pitch screw-down Galvalume roof will be attached to an existing building at the company’s Neville Island site. Construction is slated for completion by April 1, 2012

“They were very easy customers to work with,” stated Victor Gutierrez III, Universal Steel Buildings sales manager, speaking about Metalico, Inc. “Once they met with us, toured the metal building factory and saw the quality and precision engineering, they were sold on Olympia Steel Buildings.”

Metalico operates both ferrous and non-ferrous scrap metal recycling facilities in New York, Pennsylvania and Ohio, serving U.S. and Canadian markets.  All forms of metal scrap are purchased from manufacturers, small scrap dealers, demolition contractors and peddlers. Metalico Pittsburgh is a full-service metals recycling company that plays a leading role in scrap metals recovery both in the U.S. and abroad. They emphasize that recycling of metals saves natural resources, energy, and consumption of scarce landfill space.  Metalico scrap locations are positioned to offer easy access to peddlers and local residents, and encourage recycling of metal scrap, such as siding, window frames and doors, which typically end up in landfills.  They are one of a handful of companies in the U.S. that own and operate the state-of-the-art Texas Shredder model 80/104 for the shredding of scrap metal. Easy access to the facility by barge from the Allegheny, Monongahela and Ohio Rivers allows Metalico to handle the largest demolition and recycling jobs. The POHC Railroad also services their Neville Island facilities.

The U.S. Environmental Protection Agency (EPA) has recognized the company's use of renewable wind energy and named Metalico as a Green Power Partner. Metalico continues to contribute to efforts to use renewable energy, reduce pollution and encourage recycling. 

“Because Metalico prides itself on being a Green company, the decision to go with Olympia was easy,” Gutierrez observes. “Pre-engineered steel buildings are inherently Green, and since the steel building factory itself is located just a few miles away from the construction site, it meets Green building requirements of sourcing materials locally as well.”

 

 

Olympia Steel Buildings Video

 

 

80 x 100 Steel Building On Sale

Extraordinary Value! Must Be Sold!
Call Now! 1-888-449-7756
Ask for Luke

Olympia Steel Buildings has one cancelled steel building in stock right now. This building is already made, in the yard and ready for delivery. If you are interested don’t wait, Hurry, Call Now 888-449-7756 Ask for Luke.

If you’re not sure whether this building will meet your local codes, please call us! Customer service will be happy to discuss with you whether this particular cancelled metal building will meet your local code requirements. Prices listed do not include freight. Delivery charges vary depending on location.

If you need a steel building size other than those listed below call now! 888-449-7756 - Ask for Luke. 80' x 100' x 20' Steel Building - $62,850.00 Steel Building Specifications: (4) 16 x 16 Framed Openings 2 each end wall 1:12 roof Galvalume 25 year warranty 26 gauge color walls and trim 40 year warranty 4 bays @ 25 Stainless steel fasteners lifetime warranty Galvanized Girts and Purlins 6" WMP-50 Roof and Wall Insulation package included Free Freight within 300 miles of Pittsburgh PA!

Universal Steel Buildings Completes Building Construction For Pennsylvania Company, Metalico, Inc.

Universal Steel Buildings Corp. recently announced supply and construction of a twelve-thousand three-hundred square foot metal warehouse building for Pennsylvania company, Metalico, Inc. The eighty-two by one hundred fifty foot pre-engineered steel building with a twenty-foot eave height will be used for a warehouse for non-ferrous scrap metal sales. The order was placed on December 12, 2011 and the building was delivered on January 7 2012. The new building, an attractive pearl gray with rustic red trim and 1:12 pitch screw-down Galvalume roof will be attached to an existing building at the company’s Neville Island site. Construction is slated for completion by April 1, 2012

                                                                                                          

“They were very easy customers to work with,” stated Victor Gutierrez III, Universal Steel Buildings sales manager, speaking about Metalico, Inc. “Once they met with us, toured the metal building factory and saw the quality and precision engineering, they were sold on Olympia Steel Buildings.”

Metalico operates both ferrous and non-ferrous scrap metal recycling facilities in New York, Pennsylvania and Ohio, serving U.S. and Canadian markets.  All forms of metal scrap are purchased from manufacturers, small scrap dealers, demolition contractors and peddlers. Metalico Pittsburgh is a full-service metals recycling company that plays a leading role in scrap metals recovery both in the U.S. and abroad. They emphasize that recycling of metals saves natural resources, energy, and consumption of scarce landfill space.  Metalico scrap locations are positioned to offer easy access to peddlers and local residents, and encourage recycling of metal scrap, such as siding, window frames and doors, which typically end up in landfills.  They are one of a handful of companies in the U.S. that own and operate the state-of-the-art Texas Shredder model 80/104 for the shredding of scrap metal. Easy access to the facility by barge from the Allegheny, Monongahela and Ohio Rivers allows Metalico to handle the largest demolition and recycling jobs. The POHC Railroad also services their Neville Island facilities.

The U.S. Environmental Protection Agency (EPA) has recognized the company's use of renewable wind energy and named Metalico as a Green Power Partner. Metalico continues to contribute to efforts to use renewable energy, reduce pollution and encourage recycling. 

“Because Metalico prides itself on being a Green company, the decision to go with Olympia was easy,” Gutierrez observes. “Pre-engineered steel buildings are inherently Green, and since the steel building factory itself is located just a few miles away from the construction site, it meets Green building requirements of sourcing materials locally as well.”

 

 

Universal Steel Buildings Attends National Aerospace Organization In Aircraft Hangar Construction Forum

 “It was great to meet and talk with leading aircraft hangar and maintenance facility construction and support technologies experts,” stated John McAdoo, of Universal Steel Buildings. “The information we gained from attending this forum makes us very competitive in the design, supply and delivery of aircraft hangars for both military and civilian agencies.”

Universal Steel Buildings sales personnel recently completed the 8-hour course of instruction offered by the National Aerospace Organization in Military Aircraft Hanger Construction and Modernization Technologies. New MILCON technologies and materials for use at military airbase installations were presented and discussed.  This included aircraft hangar MILCON construction & modernization projects with the U.S. Air Force, Navy, Marine Corps, and Army Aviation.  Colonel John D. Thomas, U.S. Air Force (Retired), President of the National Aerospace Organization presented forum participants with certificates of completion.

 The focus of the forum was high-quality, economical, durable metal building solutions that are environmentally friendly and highly efficient.  Forum courses included instruction in pre-engineered structural processes to create faster construction times, reduce material requirements and lower construction costs. An overview of pre-engineered steel buildings for aircraft hangers, service buildings, warehousing and office space was given, along with best practices for achieving outstanding results in hangar design and construction. Also included in the forum were discussions of management and tracking of high value tools, fire detection and protection sensor systems for aircraft hangers and maintenance facilities, and environmentally compliant testing of fire suppression systems. Presentations included discussion of frame supported tension membrane hangars, including rapid erect hangars, rapid deployment shelters and rapid environmental shelters.
 NAO is an independent technology liaison agency.   It serves as an unbiased ombudsman matching the capabilities of private industry with the requirements of the Department of Defense, United States Air Force, Navy, Marine Corps, Army, and NASA.  NAO operates via funding from student tuition, event sponsors, and private industry.

 Attendees had the opportunity to meet with construction representatives from military airbases nationwide.  “It was great to meet and talk with leading aircraft hangar and maintenance facility construction and support technologies experts,” stated John McAdoo, of Universal Steel Buildings. “The information we gained from attending this forum makes us very competitive in the design, supply and delivery of aircraft hangars for both military and civilian agencies.” The event facilitated the development of valuable business partnerships and new subcontracting opportunities.  Such partnerships give small businesses a competitive edge when competing for MILCON contracts at U.S. military airbases nationwide.